Lamborghini Caloreclima N 7 BC, Manual

17

LMO EQUIPMENT

The release pushbutton on the equipment is the main component for accessing all the diagnostic
functions (activation and deactivation) as well as for releasing the control and checking
device.The release pushbutton has a multicoloured led which indicates the state of the control and
checking device during operation and when the diagnostic function is in use.

EQUIPMENT STATE INDICATORS

Description

Condition

Colour sequence

Standby, other intermediate states

No light

 
Fuel preheating “on”, waiting time 5s.max

Yellow

 
Ignition stage

Yellow, flashing

 
Correct operation

Green

 
Incorrect operation, current level of 

flame detector below permitted minimum

Green, flashing 

Drop in voltage

Alternating yellow red

 
Burner lock out 

Red

 
Fault (see table on page 8)

Red, flashing 

 
Stray light before burner ignition 

Alternating green red

Rapid flashing for diagnostics

Red, rapid flashing 

Description of operating anomalies

  Visual indication

Possible causes

  2 flashes

<

<

No flame signal

- 

Faulty fuel valves

- 

Faulty flame detector

- 

Incorrect burner setting, no fuel

- 

No ignition

 3 flashes

<

<

<

Not used

 4 flashes

<

<

<

<

Stray light on ignition

 5 flashes

<

<

<

<

<

Not used

 6 flashes

<

<

<

<

<

<

Not used

 7 flashes

<

<

<

<

<

<

<

No flame signal during operation

- 

Faulty fuel valves

- 

Faulty flame detector

- 

Incorrect burner setting, no fuel

 8 flashes

<

<

<

<

<

<

<

<

Anomalies in fuel preheating time

 9 flashes

<

<

<

<

<

<

<

<

<

Not used

 10 flashes

<

<

<

<

<

<

<

<

<

<

Incorrect electrical connection or damage to equipment

If the burner is locked out, there will be a steady red light on the lock out pushbutton.
By pressing the transparent pushbutton, the control and checking device will be released.
By pressing it for more than 3 seconds, the diagnosis stage will be activated (red light flashes
rapidly). The table below describes the causes of the lock out or fault in relation to the number of
flashes (always red).
The diagnosis function is interrupted by pressing the release button for at least 3 seconds.

DIAGNOSIS OF LMO EQUIPMENT FAULTS AND LOCK OUT