11
(95666) TROPOS
Operating Instructions
Operating Instructions
Data logger TROPOS (95666)
Option
Telephone junction box
32.95666.041 010
with overvoltage protection for the modem
Radio modem
32.95666.052 000
for short distances within the license-free frequency range of 868...870
MHz, for transfer distances up to 300 m and with clear visibility up to
3000 m; incl. antenna with 3 m cable and mounting materials
Mounting into TROPOS-H*
2)
or External installation *
3)
Option
Radio modem
32.95666.052 000
for the receiver side,
at 24 V connection
for external installation *
3)
Data evaluation
Add-on module evaluation software
METEOWARE... 36.09337.000
000
PC evaluation software for 1 station
• Graphic and tabular diagrams
• Data export formats ASCII, Excel, xbase, CSV
Options
• Network versions for up to 999 users (fl oating license)
• Multi-station version for up to 999 stations
• Wind statistics
• Data transfer as Windows System Service
Accessories
Basis modules of mechanics
TROPOS-H (housing)
32.95666.030 000
Weather proof steel panel housing for mounting of TROPOS and
different modules, incl. radiation shelter
Dimensions approx. 380 x 380 x 210 mm, Weight approx. 10 kg
(without shelter)
Option
TROPOS-MH
32.95666.032 000
Mast holder for TROPOS-H
for pipe Ø 40...80 mm
Services
Basis modules installations and pre-confi guration
TROPOS-Installation 1
97.95666.000 001
Mounting and assembling of TROPOS together with basis module
“power supply“ into the housing TROPOS-H
TROPOS-Installation 2
97.95666.000 002
Mounting and assembling of TROPOS together with basis module
“power supply” with add-on modules or basis module “solar supply”
with or without add-on modules into TROPOS-H
TROPOS-Installation 3
97.95666.000 003
Pre-confi guration of the TROPOS system
Note: The TROPOS system is basically designed for easy confi guration
via software by users
.
*
2)
The mounting into TROPOS-H depends on the respective system
confi guration. If the mounting is possible, the
TROPOS-Installation 2
is necessary.
*
3)
At external installations additional accessories or assembly works
could be necessary (cables, wirings, protective devices etc.). These
specifi c plannings and calculations have to be carry out within the
project offer and are not included in this position.
10 Safety
instructions
This system is designed according to the state-of-the-art
accepted safety regulations. However, please note the fol-
lowing rules:
1. Before setting into operation, please read all appropriate
manuals!
2. Please take notice of internal and state-specifi c guidelines
and/or rules for the prevention of accidents (e.g. the profes-
sional association). If necessary ask your responsible safety
representative.
3. Use the system according to the manual’s regulations
only.
4. Always leave the manual at hand at the place of work of
the system.
5. Use the system in technically correct conditions only! You
have to eliminate infl uences immediately, which impair the
security .
6. Use the delivered power supply only!
7. Please note the loss of warranty and non-liability by unau-
thorized manipulation of the system. You need a written
permission of the LAMBRECHT meteo GmbH for changes
of system components. These activities must be operated
by a qualifi ed technician.
8. Prevent the ingress of liquids into the devices.
11 Warranty
Please note the loss of warranty and non-liability by unau-
thorised manipulation of the system. You need a written
permission from LAMBRECHT meteo GmbH for changes
of system components. These activities must be operated
by a qualifi ed technician.
The warranty does not cover:
1. Mechanical damages caused by external impacts (e. g.
icefall, rockfall, vandalism).
2. Impacts or damages caused by over-voltages or elec-
tromagnetic fi elds which are beyond the standards and
specifi cations in the technical data.
3. Damages caused by improper handling, e. g. by wrong
tools, incorrect installation, incorrect electrical installation
(false polarity) etc.
4. Damages which are caused by using the device beyond
the specifi ed operation conditions.
