5. Select the setting for the output/
storage slot.
6. Go to the
drEH direction of rota-
tion
setting.
7. Select the
drEH
setting.
SHADING (AWNING, BLIND, SHUTTER):
Type "awning, blind or shutter"
Check the status of the drive when
the UP button is pressed. You can
move the drive using the up/down
keys to do so.
Select EINF retraction if the shading retracts
on pressing the UP button.
Select AUSF extend if the shading ex-
tends on pressing the UP button.
The value flashes and is changed in this
menu by pressing the right/left buttons as
an exception.
WINDOW
Type "Window"
Check the status of the drive when
the UP button is pressed. You can
move the drive using the up/down
keys to do so.
Select SCHL close if the window
closes on pressing the UP button.
Select OEFF open if the window
opens on pressing the UP button.
The value flashes and is changed in this
menu by pressing the right/left buttons as
an exception.
DETERMINING THE MANUAL MOVE DIRECTION:
For drives you can set which button extends
and which retracts, or which opens and
which closes. This adapts the rocker button
assignments to the actual move direction of
the drive and thus facilitates operation for the
user.
25
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
Back to
Home screen
Setting: Direc-
tion of rotation
Value
Change value (right/
left)
Back without
saving
Type and
display slot
home screen
55
Ausgänge einrichten
Smart Home Steuerung
• Stand: 11.05.2016 • Technische Änderungen und Irrtümer vorbehalten.
5. Die Einstellung des Ausgangs/Speicherplatzes anwählen.
6. Zur Einstellung
drEH Drehrichtung
wechseln.
7. Die Einstellung
drEH
anwählen.
Beschattungen (Markise, Jalousie, Rollladen):
Prüfen Sie das Verhalten des Antriebs, wenn die Taste AUF gedrückt wird. Sie können dazu
den Antrieb mit den Auf/Ab-Tasten bewegen.
ACHTUNG
Regen- und Windalarm sind deaktiviert solange dieser Menüpunkt angezeigt
wird.
Wählen Sie EINF Einfahren, wenn die Beschattung mit der Taste AUF einfährt.
Wählen Sie AUSF Ausfahren, wenn die Beschattung mit der Taste AUF ausfährt.
Der Wert blinkt und wird in diesem Menü ausnahmsweise mit Rechts/Links geändert.
5
6
7
Ausgänge (Speicherplatz 07)
Speicherplatz 07 (Typ)
Speicherpl. 07 (Drehrichtung)
Zurück ohne Speichern
Einstellung:
Drehrichtung
Speichern (lang)
Wert
Wert ändern (re/li)
Verhalten prüfen (Auf/Ab)
Typ und Anzeigeplatz
Startbildschirm
zurück zum
Startbildschirm
Save (long)
Check status
(up/down)
Back to
Home screen
Setting: Direc-
tion of rotation
Value
Change value
(right/left)
Back without
saving
Type and
display slot
home screen
56
Ausgänge einrichten
Smart Home Steuerung
• Stand: 11.05.2016 • Technische Änderungen und Irrtümer vorbehalten.
Fenster:
Prüfen Sie das Verhalten des Antriebs, wenn die Taste AUF gedrückt wird. Sie können dazu
den Antrieb mit den Auf/Ab-Tasten bewegen.
ACHTUNG
Regen- und Windalarm sind deaktiviert solange dieser Menüpunkt angezeigt
wird.
Wählen Sie SCHL Schließen, wenn das Fenster mit der Taste AUF schließt.
Wählen Sie OEFF Öffnen, wenn das Fenster mit der Taste AUF öffnet.
Der Wert blinkt und wird in diesem Menü ausnahmsweise mit Rechts/Links geändert.
3.6.1.3.
Manuell-Fahrrichtung
GRUNDEINSTELLUNG > AUSG > SP X > mAN
Bei Antrieben kann eingestellt werden, welche Taste ausfährt und welche einfährt bzw. welche öff-
net und welche schließt. Damit wird die Zuordnung der Wippen-Tasten an die tatsächliche Fahr-
richtung des Antriebs angepasst und dem Nutzer so die Bedienung erleichtert.
Zurück ohne Speichern
Einstellung:
Drehrichtung
Speichern (lang)
Wert
Wert ändern (re/li)
Verhalten prüfen (Auf/Ab)
Typ und Anzeigeplatz
Startbildschirm
zurück zum
Startbildschirm
5
6
7
Ausgänge (Speicherplatz 07)
Speicherplatz 07 (Typ)
Speicherp. 07 (Man.-Richtung)
Save (long)
Check status
(up/down)