1. APPLICATION AND FUNCTIONS
The
Smart Home Control
enables easy man-
ual operation of drives and consumers via
the touch display. Drives and consumers are
connected to the terminal unit of the base
set. Optionally up to ten additional drives or
consumers can be connected wirelessly.
A weather station can also be connected to
the terminal unit, thus allowing for automatic
control. The indoor data of the display and
the external data of the weather station are
used for automatic control. This means that
the time, indoor temperature, outdoor tem-
perature, lighting conditions, position of the
sun, wind speed and precipitation messages
can be considered. Additional interior sen-
sors can be integrated into the system via
wireless inputs.
• Automatic shading controls blinds,
awnings and shutters to reflect the light-
ing conditions, taking into account the
direction of the sun, defined move de-
lays, temperature locks, wind, rain and
frost alarms, the move position, time
and night functions.
• Ventilation control actuates sash and
sliding windows as a function of the in-
door temperature. Outdoor temperature
locks like wind, rain and frost alarms,
move positions and time functions are
considered here.
• Automatic lighting control switches
lamps to reflect the outside lighting con-
ditions (day/night) and time. If dimming
modules are used, then the dimming lev-
el (brightness of the lamp) is considered.
• The heating control system actuates a
one- or two-stage heating system as a
function of the indoor temperature, tak-
ing into account day and night (timer);
it has a timer switch for manual heating
during night operation.
• Automatic gutter control actuates a
heater in a specific outdoor tempera-
ture range.
• A daily automatic reset and an automat-
ic reset – a short time after a manual
operation – can be set for all outputs.
FUNCTIONS AND PROPERTIES OF THE DISPLAY:
The general accident prevention regulations
for power-operated windows, doors and
gates, and the VDE installation regulations
(or equivalent) must be complied with.
• Control unit with monochrome touch
display and internal temperature sensor
• Built-in rechargeable battery with USB
charging socket
• The display has a wall mount, but can
also be used like a remote control
• Up to 4 displays can be used in the sys-
tem
FUNCTIONS AND FEATURES
OF THE TERMINAL UNIT:
• Connection for the weather station
• Wired outputs for two 230-V motors,
one 24-V motor and one LED Strip Pow-
erbox (Accessories)
• Wireless communication with up to 10
drives/consumers via Elsner RF wire-
less actuators
4
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
