2. SCOPE OF SUPPLY
• Basic set 303 471 with display includ-
ing USB connection cable 0.5 m (USB
A connector to USB B micro connector)
and terminal unit including connectors
• Weather station 303473
5
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
• Wireless communication with up to 32
Elsner RF control devices/sensors
• WiFi integration (for app usage) via op-
tional WiFi module
FUNCTIONS AND PROPERTIES OF THE WEATHER
STATION:
•
Brightness measurement (1 sunlight sensor)
• Temperature measurement
• Wind speed measurement
• Precipitation sensing
• GPS receiver for date/time and installa-
tion coordinates (for computing the sun
position)
COMPATIBLE WIRELESS ACTUATORS FOR THE
SYSTEM:
• Motorised control units RF-MSG-ST,
RF-MSG, RF-MSG-PF (as of version 3.7
in all cases) for shading window drives.
A group control relay can be used to
connect several drives to one RF-MSG
if needed
• Switching Relay RF Relay ST, RF Re-
lay UP (both as of version 5.5) for con-
sumers such as lights and single-stage
heating
• Dimmers RF-L UN-ST, RF-L LED-ST (as
of version 1.4 in each case), RF-L-UP
1-10 V (as of version 1.1) for dimmable
lamps
• Heating module RF-HE-ST (as of version
5) for two-stage heating
All wireless actuators as of date of
manufacture 14-01-2016 are compatible
with the system. The production date can
be read off the serial number of the device;
it follows a pattern of "DDMMYY serial
number".
COMPATIBLE OPERATING UNITS AND SENSORS FOR
THE SYSTEM:
• Remote control Remo 8 (as of version 1.8)
• Sensor Corlo P2 RF (as of version 1.0)
• Sensor on the RF-B2-UP interface (as of
version 1.0)
• Temperature sensor WGT (as of version
1.0)
• Sensors WG AQS/TH-UP (as of version
1.0) and WGTH-UP (as of version 1.3)
for temperature measurement (moisture
and CO2 measurement of the sensors is
not evaluated)