Tips and tricks:
Press and hold the ADJUST button for 2 beeps to reverse the step
direction.
Press and hold the ADJUST button for 3 beeps to reset all color values
to ‘000’ to restart the color settings.
Press and hold the ADJUST button for 4 beeps and keep it pressed for
fast rewind.
If you don’t want to do any other changes, press and hold the SET
button for 3 beeps to exit the parameter menu.
Explanations of the parameter settings menu
29 - Reset Wifi connection, forget all wifi settings
30 - Depending from your timezone, set the offset hours from the GMT. Plus or minus precursor set by
this parameter! No Daylight Saving Time (DST) mode. The time need to be adjusted manually twice
a year in DST zone countries.
31 - Depending from your timezone, set the offset minutes (if apply) from GMT.
32 - Hour/Minutes offset pre or - from GMT. “0” is, to east of UK (Europe and Asia), “1” is to
west from UK, all USA and America
33 - If your clock is running faster or slower (GPS/Wifi synchronisation OFF), you can accurately set the
clock without any GPS/WIFI unit. Study your clock behaviour, make notes for a few days before set
anything. Press ADJUST button to run the clock faster, press ALARM button to run slower.
Each incremental adds or subtracts 0.18 sec per day. Default middle value is 128. Range 0-255.
34 - Restore default settings! At parameter 38 press the ADJUST button for 1 beep to Restore Default
Settings, then press and hold SET button for 3 beeps to exit the setup menu to activate the reset!
- 22 -
