On the bottom of the right tube under the nixie characters an orange
light turns on. This indicate that the alarm is activated.
Now press the ALARM button briefly once to check the alarm time.
The clock after a few seconds switches back to showing the time. To
change the alarm press and hold the ALARM button for 2 beeps. Set
the hour by pressing the ADJUST button. Press the SET button briefly
to go to set the minutes. To exit press and hold the SET button for two
beeps.
The alarm is now set.
When the alarm goes off, you can press the ALARM button once, to
snooze it. The orange alarm indicator light is blinking, it means the
alarm will go off again.
If you want to turn the snooze off, but keep the alarm for the next day,
press and hold the ALARM button for 2 beeps while the alarm is beep-
ing. The orange indicator light will stop blinking, lights continuously.
It means the alarm is set for the next day.
If you want to switch off the alarm, press and hold the ALARM button
for 3 beeps, but only when the alarm is not beeping. The alarm indica-
tor light is now OFF. The will be no more alarm until it switched back
by press and hold the ALARM button for 3 beeps.
Choosing different tube light options
The clock has two colored light mode options for the tube lighting.
1. Day/Night light mode - The tubes have a set color ON when day-
time starts, set by parameter #4 and changes when “Night Mode
starts set by parameter #5.
- 10 -
