19
Exclusive to Howdens
Cleaning and Maintenance
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Use a clean, damp cloth.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After washing, rinse with clean
water, damp cloth and dry carefully. When you hav
e finishe
d cleaning, reconnect the plug to the mains supply
with dry hands.
Your refrigerator performs automatic defrosting. The water formed as
a result of defrosting passes through the water collection spout
, flow
s
into the vaporisation container behind your refrigerator and evaporates
there.
• Make sure you have disconnected the plug of your refrigerator before
cleaning the vaporisation container.
• Remove the vaporisation container from its position by removing
the screws as indicated. Clean it with soapy water at spe
cific time
intervals. This will prevent odours from forming.
Replacing LED Lighting
To replace any of the LEDs, please contact the nearest Authorised Service Centre.
NOTE:
The numbers and location of the LED strips may change according to the model.
• Make sure that no water enters the lamp housing and other electrical
components.
• The appliance should be cleaned regularly using a solution of
bicarbonate of soda, lukewarm water and clean damp cloth.
• Clean the accessories separately by hand with soap and water. Do not
wash accessories in a dish washer.
• Clean the condenser with a brush at least twice a year. This will help to
save on energy costs and increase e
fficienc
y.
•
Door seals should be kept clean (As detailed above) If seals are
removable; start at a door corner gently pulling away the seal from it's
channel and working along. After cleaning and drying thoroughly,
refit
by carefully p
ress
ing
the seal back into its channel.
Evaporating tray
Defrosting
The power supply must be disconnected during cleaning.
