24
www.howdens.com
1.1 Electrical Information (For UK Type Plug)
WARNING:
This appliance must be earthed. The mains lead of this
appliance has be
en fitt
ed with an earthed plug.
IMPORTANT:
Do not use the appliance without the fuse cover in
position. Should the fuse need to be replaced, it must be replaced with
a 13A fuse, ASTA approved to BS1362.
The plug must be used with an earthed socket. If there is no such
socket in your house, please have one installed b
y a qualifie
d
electrician.
The mains lead of this appliance has be
en fitt
ed with a BS
1363A 13A fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type,
into the fuse cover.
3. Replace fuse cover.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E10
Fridge compartment is
not cold enough
Likely to occur after:
- Long term power failure.
- Hot food has been left in
the fridge.
1. Set the fridge temperature to
a colder value or set Super
Cool. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Please empty the location
at the front area of air duct
channel holes and avoid
putting food close to the
sensor.
If this warning continues an
authorised technician needs to be
contacted.
E11
Fridge compartment is
too cold
Various
1. Check is Super Cool mode is
activated
2. Reduce the fridge
compartment temperature
3. Check to see if vents are clear
and not clogged
If this warning continues an
authorised technician needs to be
contacted.