background image

4

www.howdens.com

Risk of damage to 

appliance:

Do not attempt to  

move the appliance  

by the door.

Risk of damage to 

property:

Take care of 

surrounding area when 

moving the appliance 

to prevent damage to 

flooring, wall coverings, 

pipes etc.

Two person lift.

Risk of injury:  

Beware of sharp metal 

edges. Use gloves when 

handling.

The Dishwasher

must be level.

Ensure that all packing 

and transit protectors 

have been removed 

from the appliance 

before positioning.

Do Not

 install a 

damaged machine.

NOTE:

 Do not leave the 

dishwasher door open. 

Be careful not to trip 

over open door.

NOTE:

 If the electricity 

cable is damaged it 

must be replaced by a  

competent person.

Safety Information

Warning for injury or 
property damage risk.

Warning for electric shock.

Warning for risk of 
fire / flammable materials.

Throughout this manual the following symbols are used.

DO NOT KINK HOSES 

BEHIND MACHINE!

Machine will not work properly.

or machine does not fill / empty -  

CHECK HOSES

 

for kinks

.

If error codes are displayed:

Summary of Contents for FLM8600









































Reviews: