Electrical Connections
13
IMPORTANT: ENSURE THAT THE ELECTRICITY SUPPLY IS SWITCHED
OFF BEFORE CONNECTING.
Your appliance must be connected to fixed
wiring via the use of a double pole switched
fused spur outlet with at least 3mm contact
separation, with a pilot lamp.
The isolation switch must be accessible after
installation.
(See technical data for fuse rating).
We strongly recommend the appliance is
connected by a qualified electrician who is a
member of the N.I.C.E.I.C. or Corgi who will
comply with the I.E.E and any local regulations.
NOTE:
The terminology -DOUBLE POLE+ means that
both the live and neutral supplies are switched
and disconnected at the same time.
The terminations labelled SUPPLY are for the
connection for the internal house wiring and the
terminations labelled LOAD are for the
connection for the appliance.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code:-
Blue ...................... Neutral
Brown................... Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your spur
box, proceed as follows;
The wire which is coloured blue must be connected to the terminal which is
marked with the letter ‘N’ or coloured black.
The wire which is coloured brown must be connected to the terminal which
is marked with the letter ‘L’ or coloured red.
BLUE
(NEUTRAL)
BROWN
(LIVE)
