background image

This appliance is marked according to the European Directive 2002/96/EC
on Waste Electrical and Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly you will help prevent potential negative
consequences for the environment and human health. The symbol on this
product indicates that this product may not be treated as household waste.
Instead it should be handed over to the applicable collection point for recy-
cling of electrical and electronic equipment. Disposal must be carried out in
accordance with local enviromental regulations for waste disposal.  For more detailed
information please contact your local council  household waste site.

Issue  : 

December 2014

YOUR GUARANTEE

Product Guarantee Details  (UK only) 

Your appliance has the bene

Į

t of a comprehensive manufacturer’s guarantee 

which covers the cost of breakdown repairs. (Details of which are shown on 
your Proof of Purchase Document).  

 

x

 

Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE 
PROOF OF PURCHASE) 

x

 

The product must be correctly installed and operated in accordance with the 
manufacturer’s instruc ons and used for normal domes c purposes. 

x

 

This guarantee does not cover accidental damage, misuse or altera ons which are 
likely to a

ī

ect the product. 

x

 

The guarantee is invalid if the product is tampered with, or repaired by any 
unauthorised person.  

              (The guarantee in no way a

ī

ects your statutory or legal rights) 

 

          

What to do if you need to report a problem-

 

                    

Please ensure you have ready:

 

-

 

The product’s model & serial numbers

 

-

 

Howdens Proof of Purchase

 

document

 

-

 

Your full contact details.

 

 

Call the Lamona Service Line on 0845 00 60 006

Summary of Contents for HJA2182

















Reviews: