background image

WARNING

• 

If the hob surface is cracked, broken or shattered, switch off the 

appliance to avoid the possibility of electric shock and call for a 

service engineer’s visit.

• 

The appliance and its accessible parts become hot during use. 

Care should be taken to avoid touching heating elements. Children 

less than 8 years of age shall be kept away unless continuously 

supervised. This appliance can be used by children aged from 8 

years and above and persons with reduced physical sensory or 

mental capabilities or lack of experience and knowledge if they 

have been given supervision or instruction concerning the use of 

the appliance in a safe way and understand the hazards involved. 

Children shall not play with the appliance. Cleaning and user 

maintenance shall not be made by children without supervision. 

• 

Do not use a steam cleaner on any cooking range, hobs and oven 

appliances.

• 

The appliance is not intended to be operated by means of an 

external timer or separate control system.

• 

Unattended cooking on a hob with fat or oil can be dangerous and 

may result in fire. 

•  NEVER try to extinguish a fire with water, but switch off the 

appliance and then cover the flame with a lid or damp cloth.

•  Danger of fire: Do not store items on the cooking surfaces.

• 

Only use hob guards designed by the manufacturer of the cooking 

appliance or indicated by the manufacturer of the appliance in 

the instructions for use as suitable or hob guards incorporated in 

the appliance. The use of inappropriate hob guards can cause 

accidents.

CAUTION

• 

The cooking process has to be supervised. A short term cooking 

process has to be supervised continuously.

• 

Fire Safety Advice

If you do have a fire in the kitchen, don’t take any risks - get everyone out of your home and call the 

Fire Brigade.

SAFETY

Summary of Contents for LAM1744





























Reviews: