Lamona LAM1902, User Manual

Automatic Heat Up

Activate this function to get a desired heat setting in a shorter time. When it is on, the zone

operates on the highest setting in the beginning and then continues to cook at the desired

heating setting.

To activate the function the cooking zone must be cold.

To activate the function for a cooking zone:

 touch   (  comes on). Immediately touch

a desired heat setting. After 3 seconds   comes on.

To deactivate the function:

 change the heat setting.

PowerBoost

This function makes more power available to the induction cooking zones. The function

can be activated for the induction cooking zone only for a limited period of time. After this

time the induction cooking zone automatically sets back to the highest heat setting.

Refer to “Technical data” chapter.

To activate the function for a cooking zone:

 touch  .   comes on.

To deactivate the function:

 change the heat setting.

Timer

Count Down Timer

You can use this function to set how long the cooking zone should operate for a single

cooking session.
First set the heat setting for the cooking zone then set the function.

To set the cooking zone:

 touch   again and again until the indicator of a necessary

cooking zone comes on.

To activate the function:

 touch   of the timer to set the time (00 - 99 minutes). When the

indicator of the cooking zone starts to flash slowly the time counts down.

To see the remaining time:

 set the cooking zone with  . The indicator of the cooking

zone starts to flash quickly. The display shows the remaining time.

To change the time:

 set the cooking zone with  . Touch   or  .

To deactivate the function:

 set the cooking zone with   and touch  . The remaining

time counts back to 00. The indicator of the cooking zone goes out.

11