Exclusive to Howdens Joinery.co
Page _ 13
User manual LAM2603
Installing Your Extractor
Fit the upper chimney piece to the frame using the 2 screws A (Fig.10).
Fig.10
A
$WWDFKWKHORZHUFKLPQH\SLHFHWRWKHXSSHURQHDQGÀ[LWFDUHIXOO\XVLQJDGKHVLYHWDSH/
(Fig.11a).
Partially unscrew the 2 screws O a maximum of 3 mm (Fig.11a).
Insert the extractor body into the frame paying attention that the previously unscrewed screws
O, hook into the slots in the lower part as indicated in (Fig.11b).
Tighten in the 3 screws N and the 2 screws O (Fig.11b).
Fig.11a
L
O
O
Max 3mm
Fig.11b
O
N
N
L
O