Page _ 14
www.howdens.com
LAMONA
Appliances
Before Beginning Installation
Check that the p
The maximum distance between the cooker hood and your discharge outlet should be 3 metres, with
one 90 degree bend. For each additional 90 degree bend, the maximum distance is reduced by a metre.
Use 150mm ducting for optimum performance.
Use appropriate fixings for ceiling construction type.
Cable Grid - Recirculation Mode
To ensure that mains cable does not fall and enter the motor housing, fit the cable grid.
roduct purchased is of a suitable size for the chosen installation area. In addition
check whether there is an electrical socket available that will be accessible once the hood is mounted.
If the product is going to be used in extraction mode, then there should also be space to connect a
ducting hose to the outside.
Carry out all necessary masonry work prior to the
of the cooker hood and cabinetry.
Ensure that all electrical connections are carried out by a suitably
person.
•
Check inside the product and ensure that there is no transit packaging or any other materials, such as
packets of screws, guarantees etc. These should be removed and kept for future use.
•
Protect any hob already installed below with a blanket or cardboard etc, to prevent possible damage.