background image

Dear Customer,

Congratulations on your choice of a LAMONA domestic appliance.

The user manual will help you use your product quickly and safely. 

• 

Please read this user manual before installing and using the product.

• 

Always follow the safety instructions.

• 

Keep this user manual within easy reach for future reference. 

• 

Please read any other documents supplied with the product.

Explanation of symbols

Throughout this user manual the following symbols are used:

Important information or useful tips about usage.

Warning for possible hazards to health and property.

W

Metal Surfaces of the Extractor and Condensation

When cooking with pans using a large water content, large quantities of vapour and steam 

can be produced very quickly. This steam may condense onto the cold metallic surfaces of the 

extractor and even the splash back area if tiled, glazed etc. 

(This is not a fault with either the hob or extractor if correctly installed).

The amount of this condensation on any particular surface will depend on many factors including the 

ambient temperature in the kitchen, the related ambient temperature of the metal surfaces, the 

general ventilation within the kitchen, the type of food being cooked and the duration. Using lids on

pans can help reduce the amount of steam being released and subsequent condensation. 

This appliance is marked according to the European Directive 2012/19/EU on Waste

Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of

correctly you will help prevent potiential negative consequences for the environment 

and human health. The symbol on this product indicates that this product may not be

treated as household waste. Instead it should be handed over to the applicable 

collection point for recycling or electrical and electronic equipment.  Disposal must be

carried out in accordance with local environmental regulations for waste disposal. For 

more detailed information please contact your local council household waste site.

arning possibility of electric shock.

By placing the              marking on this product, we declare, on our own responsibility, compliance to all of 

European safety, health and environmental requirements stated in the legislation for this product.

Energy Efficiency

 

In order to optimise efficiency of the product and reduce environmental impact we recommend

 the following:

•    Product is installed in ducted configuration, using maximum Ø of ducting advised in this manual, 

      ducting as straight and as short as possible.

•    Any filters are cleaned/replaced when necessary to maintain good airflow and grease filter 

      efficiency.

•    Switch on the hood at the minimum speed required to clear unwanted cooking odours.

•    Switch off lighting when not in use or not required

.

Page _ 03

Exclusive to Howdens Joinery.co

User manual LAM2851

Summary of Contents for LAM2851























Reviews: