8
9
www.howdens.com
Built-Under Larder Fridge
LAM6000
Instructions and Installation
Waste Electrical and Electronic Equipment (WEEE)
The waste electrical symbol on this product indicates that this product
may not be treated as household waste. Instead it should be handed
over to the applicable collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal. For more detailed
information please contact your local council household waste site.
This appliance meets all relevant safety standards.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Electrical Requirements
Before you insert the plug into
the wall socket make sure the
voltage and frequency shown
in the rating plate inside the
appliance corresponds to your
electricity supply. We recommend
that this appliance is connected
to the mains supply via a suitable
switched and fused socket in a
readily accessible position. Should
the mains lead of the appliance
become damaged or should it
need replacing at any time, it
must be replaced by a suitably
competent person.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
WARNING! This
appliance must be earthed
If the fitted moulded plug is not
suitable , then the plug should
be cut off. Destroy the old plug
which is cut off as a plug with
bared cables could present a
shock hazard if inserted into a
socket. The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to be
replaced an ASTA BEAB approved
BS 1362 fuse of the same rating
must be used. Do not forget to
refit the fuse cover. In the event of
losing the fuse cover the plug must
not be used until a replacement
fuse cover has been fitted.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
IMPORTANT! Fitting a
different plug
As the colours of the wires
in the mains lead of this
appliance may not correspond
with the coloured markings
identifying the terminals in your
plug proceed as follows:
(See diagram).
1.
Connect the green-yellow
or green (Earth) wire to the
terminal in the plug marked
‘E’ or with the symbol
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP
Waste Electrical and Electronic Equipment
(WEEE).
The waste electrical symbol on this product indicates
that this product may not be treated as household
waste. Instead it should be handed over to the
applicable collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for
waste disposal. For more detailed information please
contact your local council household waste site.
This appliance meets all relevant safety standards.
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure the
voltage and frequency shown in the rating plate inside the
appliance corresponds to your electricity supply.
We
recommend that this appliance is connected to the mains
supply via a suitable switched and fused socket in a readily
accessible position. Should the mains lead of the appliance
become damaged or should it need replacing at any time, it must
be replaced by a suitably competent person.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable , then the plug should be
cut off . Destroy the old plug which is cut off as a plug with bared
cables could present a shock hazard if inserted into a socket.
The moulded plug on this appliance incorporates a 13 A fuse.
Should the fuse need to be replaced an ASTA BEAB approved BS
1362 fuse of the same rating must be used. Do not forget to refit
the fuse cover. In the event of losing the fuse cover the plug must
not be used until a replacement fuse cover has been fitted.
IMPORTANT! FITTING A DIFFERENT PLUG
. As the colours of the wires in
the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug proceed
as follows: (See diagram).
1.
Connect the green-yellow or
green (Earth) wire to the
terminal in the plug marked 'E'
or with the symbol or
coloured green and yellow or
green.
2.
Connect the blue (Neutral)
wire to the terminal in the plug
marked 'N' or coloured black.
3.
Connect the brown (Live) wire
to the terminal in the plug
marked 'L' or coloured red.
4
5
or
coloured green and yellow or
green.
2.
Connect the blue (Neutral)
wire to the terminal in the
plug marked ‘N’ or coloured
black.
3.
Connect the brown (Live)
wire to the terminal in the
plug marked ‘L’ or coloured
red.
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP
Waste Electrical and Electronic Equipment
(WEEE).
The waste electrical symbol on this product indicates
that this product may not be treated as household
waste. Instead it should be handed over to the
applicable collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for
waste disposal. For more detailed information please
contact your local council household waste site.
This appliance meets all relevant safety standards.
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure the
voltage and frequency shown in the rating plate inside the
appliance corresponds to your electricity supply.
We
recommend that this appliance is connected to the mains
supply via a suitable switched and fused socket in a readily
accessible position. Should the mains lead of the appliance
become damaged or should it need replacing at any time, it must
be replaced by a suitably competent person.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable , then the plug should be
cut off . Destroy the old plug which is cut off as a plug with bared
cables could present a shock hazard if inserted into a socket.
The moulded plug on this appliance incorporates a 13 A fuse.
Should the fuse need to be replaced an ASTA BEAB approved BS
1362 fuse of the same rating must be used. Do not forget to refit
the fuse cover. In the event of losing the fuse cover the plug must
not be used until a replacement fuse cover has been fitted.
IMPORTANT! FITTING A DIFFERENT PLUG
. As the colours of the wires in
the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug proceed
as follows: (See diagram).
1.
Connect the green-yellow or
green (Earth) wire to the
terminal in the plug marked 'E'
or with the symbol or
coloured green and yellow or
green.
2.
Connect the blue (Neutral)
wire to the terminal in the plug
marked 'N' or coloured black.
3.
Connect the brown (Live) wire
to the terminal in the plug
marked 'L' or coloured red.
4
5
Information
The model’s technical information can be retrieved by scanning the
QR code on the Energy label and proceeding to the website entering
the model identifier.
1
•
Leave to stand for at least 4 hours before switching on to allow
compressor oil to settle, especially if transported horizontally.
•
If you are discarding an old refrigerator please ensure any door
lock or latch is disabled so as to not trap children
•
Do not dispose of the appliance on a fire. The appliance
contains substances in the insulation (Cyclopentane) and in the
cooling system (R600a gas) which are highly flammable.
Therefore be careful not to damage the appliance or cooling
system. If damaged avoid sources of ignition and ventilate the
room immediately.
•
Contact your Local Council for disposal of an old appliance.
•
We do not recommend the use of this appliance in unheated
rooms or outbuildings.
•
This refrigerator must only be used for it's intended purpose of
storing edible foodstuffs.
•
This appliance is not suitable for freezing foodstuffs.
•
Ensure that the plug remains accessible after installation. DO
NOT USE multi-socket adapters and leads.
•
Failure to observe the installation and safety instructions may
invalidate your Guarantee and cause harm to the person or
property.
3 year guarantee available.
Register your appliance within 90 days
2
By registering your appliance and creating an account, we
will keep you up to date with the latest product information
and notify you immediately of any important product updates
1
Lines are open Monday to Friday 9am to 5pm. Calls will be charged at your local rate
and may be recorded and monitored for training and quality purposes.
2
So that in the event of an important product update, or recall, we can contact you.
Call now
1
0333 010 0009
Alternatively, visit
www.howdens.com/appliance-registration
Free 3 year
guarantee
LA
M
ON
A APPLIAN
CE
GU
ARANTE
E
YEARS
3
SUPPLIER’S NAME
MODEL IDENTIFIER
A
A
(*)
SUPPLIER’S NAME
MODEL IDENTIFIER
A
A
(*)
I
nformation
The model’s technical information can be r etrieved b y scanning the Q R code on the
Energy label and proceeding to the website entering the model identifier.
Congratulations on your choice of
LAMONA
appliance.
IMPORTANT !
DO NOT connect the appliance to the electricity supply until all
packing and transit protectors have been removed.
Please read these instructions carefully to ensure safe and
trouble-free operation.
Check that the appliance is undamaged upon receipt. NEVER
install a damaged appliance
WARNING !
