background image

16

17

www.howdens.com

Built-Under Larder Fridge

 

LAM6000

Instructions and Installation

2. Cleaning and Care

CLEANING AND CARE

* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.

* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.

* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.

* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.

* Make sure that no water enters the temperature control box.

* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.

* Check door seals regularly to ensure they are clean and free
from food particles

*

 

Removal of door trays:

To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.

1

6

1

7

Starting at a corner, gently 
pull the seal away, working 
along puling the seal out of 
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal 
pressing the seal into the 
channel.

*

 

Cleaning of air vent grilles

Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.

•  We recommend that you switch 

off the larder refrigerator at the 

socket outlet and pull out the 

mains plug before cleaning.

•  Never use any sharp instruments 

or abrasive substances, soap, 

household cleaner, detergent 

and wax polish for cleaning.

•  Use luke warm water to clean 

the cabinet of the refrigerator 

and wipe it dry.

•  Use a damp cloth wrung out in 

a solution of one teaspoon of 

bicarbonate of soda to one pint 

of water to clean the interior 

and wipe it dry.

•  Make sure that no water enters 

the temperature control box.

•  If the larder refrigerator is not 

going to be used for a long 

period of time switch it off, 

remove all food, clean it and 

leave the door ajar.

•  Check door seals regularly to 

ensure they are clean and free 

from food particles.

•  Starting at a corner, gently 

pull the seal away, working 

along puling the seal out of the 

channel.

•  To re-fit start at a corner and 

firmly press the seal into place. 

Work along the seal pressing the 

seal into the channel.

CLEANING AND CARE

* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.

* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.

* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.

* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.

* Make sure that no water enters the temperature control box.

* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.

* Check door seals regularly to ensure they are clean and free
from food particles

*

 

Removal of door trays:

To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.

1

6

1

7

Starting at a corner, gently 
pull the seal away, working 
along puling the seal out of 
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal 
pressing the seal into the 
channel.

*

 

Cleaning of air vent grilles

Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.

CLEANING AND CARE

* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.

* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.

* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.

* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.

* Make sure that no water enters the temperature control box.

* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.

* Check door seals regularly to ensure they are clean and free
from food particles

*

 

Removal of door trays:

To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.

1

6

1

7

Starting at a corner, gently 
pull the seal away, working 
along puling the seal out of 
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal 
pressing the seal into the 
channel.

*

 

Cleaning of air vent grilles

Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.

Removal of door trays:

•  To remove a door tray, remove all the contents and then gently push 

the tray upwards at the outer edges.

Cleaning of air vent grilles

•  Keep the air vents free from obstruction and clean using a soft brush 

and vacuum cleaner.

Summary of Contents for LAM6000


















Reviews: