7
www.howdens.com
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Cancel
3 sec.
Load
Press and hold
(display counts
down 3,2,1)
Press and hold
(display counts
down 3,2,1)
Switch
Off
to save new water
hardness setting
Switch
Off
to save new
rinse aid setting
Press to select
new water
hardness setting
Press to select new
rinse aid setting
Press and
hold until
display shows
Press and
hold until
display shows
Switch
On
Switch
On
Select water
hardness setting
(r...)
Select rinse
aid setting
(P...)
1
2
Setting the correct water hardness programme by adding dishwasher salt to
increase washing efficiency and performance.
To add the salt, pour one litre of cold water into the salt
container and then completely fill with dishwasher salt.
Some water and salt may spill out of the container. It is
recommended to use a rinse programme or complete
a wash cycle to remove any spilled salt and prevent
possible corrosion.
Setting water hardness level / adding dishwasher salt
Setting rinse aid level / adding rinse aid
If there are stains on tableware items after washing
the level must be increased and if there is a blue trace
after wiping them by hand, it must be decreased.
Adjust the setting from the values 0,1,2,3,4 (factory
pre-set, level 3).
Rinse aid helps dry the dishes without streaks and stains. It is automatically
released during the hot rinse phase.
