_ 11
User manual LAM8800
04 - Installation
The tumble dryer is fully compatible with 575mm deep kitchen units and complies with all current relevant
EU regulations.
Your dryer is provided with a vent hose which will extend to approx 1.6m. We strongly recommend that this
is vented through the wall with the attachment provided. The position of the hole (100mm diameter) for the
vent directly behind the tumble dryer is shown in the diagram below.DO NOT KINK OR FOLD HOSE.
If the through the wall vent is to be positioned other than behind the dryer, the vent hose should be
positioned at
fl
oor level and through the adjacent side panel to relevant position. The plinth must be cut-out
to accommodate the air vent grill at the bottom front of the tumble dryer (DO NOT FOLD / KINK HOSE).
The air vent at the front of the appliance must never be covered or blocked in any way as this will
cause the dryer to overheat.The dryer should not be placed directly next to ovens or cookers, as the
performance of the dryer may be affected.
600mm
80mm
125 mm
695 mm