14_
LAMONA
Appliances
Instructions to
fi
t the external vent kit
1.
Make a hole in the outside wall to
fi
t the vent kit.
2.
Pull the vent hose from the rear of the dryer (A) and remove the end adaptor by removing the screw (B)
3.
Pull the vent through the outside wall and attach to the inner venting (D) and tighten the jubilee clip.
4.
Slide the wall vent back and
fi
x using 4 suitable screws (not supplied).
B
A
D
D
*Ensure hose is not kinked or crushed!