_ 07
User manual LAM8800
• The special mains cable and
plug assembly must only be
replaced with a genuine part
by the manufacturer or service
agents in order to avoid a
hazard.
• WARNING:
If you need
to stop the tumble dryer
before the end of a drying
cycle, ensure that the load
and appliance are cooled by
utilizing the cooldown period
denoted on the control panel.
Once the load is removed,
all items need to be quickly
spread out so that any residual
heat is dissipated.
• Remove all objects from
pockets eg. lighters, matches.
• DO NOT
allow
fl
uff to
accumulate around the tumble
dryer. Risk of
fi
re
• DO NOT
exceed the
recommended maximum load.
• DO NOT
dry unwashed items in
the tumble dryer
• DO NOT
place articles in the
dryer if anything other than a
water solution has been used
in the cleaning process.
• DO NOT
use tumble dryer if
industrial chemicals have been
used for cleaning.
• DO NOT
dry articles singly as
they tend to roll up and so
increase drying time.
• DO NOT
dry woolen or wool
mixture articles unless
the article is labelled as
suitable. This should avoid
shrinkage.
• DO NOT
block / kink venting
hose.
• Items such as foam rubber
(latex foam) water proof
textiles, rubber backed
articles and clothes / pillows
fi
tted with foam rubber pads
such not be dried in the
tumble dryer.
• Fabric softeners or similar
products should be used
as speci
fi
ed by the fabric
softener instructions.
• Items that have been soiled
with substances such as
cooking oil, acetone, alcohol,
petrol, kerosene, spot
removers, turpentine, waxes
and wax removers should be
washed in hot water with an
extra amount of detergent
before being dried.
• NEVER SWITCH THE
DRYER OFF AND LEAVE A
HOT LOAD IN THE DRUM –
RISK OF FIRE.
