25
Exclusive to Howdens
Using the fan
The fan is located in the middle of the hob with the
extractor facing downwards.
The cover does not need to be removed from models with
an open cover.
Important: Do not put the cover onto the induction hob!
Risk of burning!
Switching the fan ON and OFF
1.
Press the ON/OFF key
(approx. 1 second) until the fan
hob power setting appears and a short signal will
sound. The controls are ready for operation.
2.
Use the hob power setting display (as a key) to select a
cooking zone. The standby dot will light up.
3.
The touch control
must be
activated immediately afterwards. A hob power setting
will be switched ON.
left
Power setting
centre
Power setting
right
Power setting
To change the fan level, select the fan display and then
press the sensor field.
Important:
The stand-by dot of the cooking zone selected must light up.
Automatic function
1.
To select the automatic mode, press the fan display
(as key) until an A for automatic mode is shown in the
display.
The standby dot will light up.
2.
Then select one or more cooking zones and set a power
level.
3.
The fan level is now automatically controlled according
to the set power levels.
The automatic mode regulates slightly delayed and
gradually according to the set power levels.
You can switch back to manual mode at any time by
holding down the fan display or selecting the fan display
and pressing the sensor field.
Hint:
In order to ensure that extraction functions well with
tall cooking pots (e.g. pots used for cooking asparagus),
you can place a wooden spoon under the lid of the pot.
3. Operating the hob hood
(continued)
Fan indication
2.
3.
1.
Press for a longer time
2.
3.
1.
The open cover does not
need to be removed.
Summary of Contents for LAM9550
Page 2: ...2 www howdens com...
Page 43: ...43 Exclusive to Howdens...
