English
5
EN
FR NL DE ES IT PL CS SL BG
Do not leave the appliance in the open air
for too long. Use the packaging supplied to
store the appliance.
Using this appliance incorrectly or failing to
comply with these instructions could cause
a fire!
In other words, the Foot Spa should never
be used
unattended, especially when children are
present,
under a cover or cushion,
close to petrol or other highly flammable substances.
or on a thick carpet, which could block the
air vents.
Do not put the appliance in the shower tray,
bathtub or sink when filling.
If the equipment is faulty or malfunctions,
stop and unplug it immediately.
Never plug the Foot Spa into the mains when
you already have your feet in the water. Dam-
age to the device could cause a potentially
fatal electric shock.
INSTRUCTIONS FOR USE
Description of the Foot Spa, 2
1 Function button
2 Drain valve
3 Splash guard
4 Bubble strip
5 Massage nozzle
6 Rubber feet (under the device)
7 Maximum fill limit
USING THE FOOT SPA
Setting it up
1 Remove the packaging. Check that the appliance,
mains plug and cable are not damaged in any way.
2 Put the appliance on a flat, stable, hard surface with a
non-slip mat alongside it to avoid any risk of falling.
3 Fill the appliance up to the “MAX” level
with water heated to the required tem-
perature. Never fill above this level.
4 Check that the appliance is switched to “off” before
connecting to the mains. Make sure too that your
hands are not wet and your feet are not in the water.
5 Sit on a chair and put your feet in the water.
Never stand up in the Foot Spa.
6 Press the function button (1) to activate the massage.
The vibration massage, spa massage and water tem-
perature control will all start running at the same time.
Massage nozzle
The central massage nozzle massages the feet very gently
and stimulates the circulation. It can be removed for cleaning.
A heating system is installed under the foot support
to keep the water warm for a certain period. It is
not designed for heating cold water. For optimum
efficiency, we recommend a massage of 30 minutes
maximum. After use, empty the water through
the narrow drain valve (2) of the Foot Spa.
MAINTENANCE
Storage
• Put the massage device in its box or in a dry place.
• Do not put the appliance in contact with sharp or
pointed items that might damage the outer surface.
• Do not wrap the power cable round the appliance.
(This may cause wear and tear and break the cable).
Cleaning
• Unplug the appliance and allow it
to cool before cleaning it.
• Do not immerse the Foot Spa in water or any other
liquid to clean it. Use a gentle detergent and a soft,
slightly damp sponge. Pat dry with a dry, clean cloth.
• Never use abrasive detergents, brush-
es or solvents to clean it.
