7
· E
N
G
LI
SH
EN
Recommen-
dations for a
power supply
via USB
When you connect a device via the
USB port on your computer, make
sure that it can provide the electri-
cal power required. Always use USB
ports 3.0 or higher and connect lap-
tops to the mains supply. Otherwise
the device might not work or work
with impaired performance. Use
of a USB power adapter capable
of delivering at least 1.0A is recom-
mended for optimum performance.
Description of the
manicure/pedi-
cure set 1
01
Pointed bit
02
Abrasive cone
03
Polishing cone
04
Felt cone
05
Cylindrical bit
06
Sanding band
07
ON/OFF button
08
Direction button
09
Speed +/-
10
USB cable
11
Carry case
12
Storage box
Instructions
for use 2
Charging the device
You can charge your device using
the USB cable provided. Connect
the USB charger cable to a suita-
ble mains adapter and the device
( 2.1). Then plug the mains power
adaptor into a suitable mains sock-
et. You can also recharge the device
with the USB charging cable via the
USB plug on your computer.
The charging LED indicator flash-
es red while the device is charg-
ing and turns blue when the bat-
tery is charged.
When the battery is low, the charge
indicator flashes red. When the bat-
tery is empty, the device automat-
ically switches off.
The charging time is approximate-
ly 2.5 hours and the device’s bat-
tery life is 90 minutes once charged.
Using the device
01
Remove the USB cable from
the device after charging it.
02
Open the attachment
compartment. Choose the
desired treatment attachment
and insert it into the notch
on the main unit ( 2.2).
03
Press the ON/OFF button
for a few seconds.
04
Select the direction of rota-
tion and the desired rotation
speed using the relevant
Summary of Contents for LA130514
Page 2: ...2 7 1 2 8 9 10 11 3 4 5 6 12 1 ...
Page 3: ...3 2 2 1 2 2 ...