6
· E
N
G
LI
SH
EN
of discomfort or pain, stop us-
ing it for at least an hour.
I
f the
phenomenon persists, discon-
tinue using the hot water bottle
and, if necessary, quickly consult
your doctor.
N
ever use this appli-
ance in a room in which aerosols
(sprays) are used or in a room
where oxygen is administered.
The photographs and other images of the
product in this manual and on the packaging
are as accurate as possible, but do not claim
to be a perfect reproduction of the product.
Introduction
Thank you for purchasing the Waist Warmer
heating belt with individual hot water bottle.
Convenient and easy to use, it will keep you
warm for several hours by charging it in just a
few minutes. Very versatile, the hot water bot-
tle can be used alone to warm your hands and
neck, or with the adjustable belt for a targeted
action on the stomach or back. Furthermore,
you can use it completely safely thanks to its
superior protection. Finally, the cover of this
hot water bottle is made of 45% fabric contain-
ing fibres obtained from recycled PET materi-
al from plastic bottles.
Features 1
The body of the hot water bottle is pliable and
very comfortable.
Its walls consist of 2 thin, thermo-compressed
film layers, increasing its durability and safety.
With the technology it has, the electric hot
water bottle has a faster heating system, and
heat is maintained for longer.
Instructions for use
When you have removed the product from its
packaging, check the integrity of the device
and that of the components supplied with it.
If in doubt, do not use the product and con-
tact the product’s dealer. Do not use the prod-
uct if there are signs of defects and return it
to your dealer.
Charging the electric
heating pad 1
Put the hot water bottle down flat on a table.
Insert the charger into the hot water bottle
connector as shown in the diagram. Connect
the charger plug to the socket. The warning
light comes on and the electric hot water bot-
tle is heating up.
Once the electric hot water bottle is ready,
the light goes out and you can disconnect the
charger. You can then use it alone or slip it into
the belt depending on how you want to use it.
To make sure the heat is evenly spread,
you are advised to shake the electrical
hot water bottle gently after a few min-
utes during charging.
It takes about 10 minutes to charge the elec-
tric hot water bottle (depending on the am-
bient temperature) so that the surface of the
electric hot water bottle reaches the correct
temperature.
Maintenance
Maintenance
• Tip: if you want the electric hot water
bottle to stay hot for longer, repeated-
ly squeeze the electric hot water bot-
tle to mix the water. This action pro-
vides a uniform temperature of the water
in the hot water bottle and extends
the time during which it can be used.
E-IM-WaistWarmerGo-Lot001.indd 6
E-IM-WaistWarmerGo-Lot001.indd 6
11/08/2021 11:27:13
11/08/2021 11:27:13
