manualshive.com logo in svg

Lancair Columbia 400, Information Manual

The Lancair Columbia 400 Information Manual provides detailed instructions and essential information for the operation of this remarkable aircraft. It is available for free download on our website, where users can easily access this manual and enhance their understanding of this high-performance product.

Share
Download
background image

 

 Section 7 

Columbia 400 (LC41-550FG) 

Description of the Airplane and Systems 

  

 

 

 

 

Initial Issue of Manual: November 10, 2004 

RC050002 

Latest Revision Level/Date: A/12-01-2004 

7-131

 

 

START/STOP

 – Starts and stops the Count Up, Count Down, and Flight timers. In 

Configuration Mode, steps through configuration pages in reverse. 

 

CRSR

 – Initiates starting time entry for the Count Down timer and cancels transponder code 

entry. Returns cursor to last code digit within five seconds after entry. Selects changeable 
fields in Configuration Mode. 

 

CLR

 – Resets the Count Up, Count Down, and Flight timers. Cancels the previous keypress 

during code selection and Count Down entry. Returns cursor to the fourth code digit within 
five seconds after entry. Used in Configuration Mode. 

 

8

 – Reduces Contrast and Display Brightness when the respective fields are displayed and 

enters the number eight into the Count Down timer. Used in Configuration Mode. 

 

9

 – Increases Contrast and Display Brightness when the respective fields are displayed and 

enters the number nine into the Count Down timer. Used in Configuration Mode. 

 

Function Displays – 

The following functions are shown in the display window. 

 

PRESSURE ALT

 – Displays the altitude data supplied to the GTX 330 in feet, hundreds of 

feet (i.e., flight level), or meters, depending on configuration. 

 

FLIGHT TIME

 – Displays the Flight Time, controlled by the START/STOP and CLR keys 

when Automated Airborne Determination is configured as normal. Under Automated 
Airborne Determination control, the timer begins when liftoff is sensed. 

 

ALTITUDE MONITOR

: Controlled by START/STOP key. Activates a voice alarm and 

warning annunciator when altitude limit is exceeded. 

 

OAT/DALT

: Displayed when the GTX 330 is configured with temperature input. Displays 

Outside Air Temperature and Density Altitude. 

 

COUNT UP TIMER

 – Controlled by START/STOP and CLR keys. 

 

COUNT DOWN TIMER

 – Controlled by START/STOP, CLR, and CRSR keys. The initial 

Count Down time is entered with the 0 – 9 keys. 

 

CONTRAST

 – This page is only displayed if manual contrast mode is selected in 

Configuration Mode. The 8 and 9 keys control contrast. 

 

DISPLAY

 – This page is only displayed if manual backlighting mode is selected in 

Configuration Mode. The 8 and 9 keys control backlighting. 

 
GTX 330 Configuration Mode

 – The GTX 330’s configuration is normally set at time of 

installation, including the Mode S aircraft address. To view or change any of the GTX 330 
configuration parameters, you must access the GTX 330 Configuration Mode. Use caution when 
changing configuration. When in doubt, contact your authorized Garmin Aviation Service 
Center. Your Garmin dealer can assist in configuration changes. The Configuration Mode should 
not be used during flight. 
 

To use the GTX 330 Configuration Mode: 

1.  Press and hold the FUNC key while powering on the unit using the STBY, ON, or ALT key 

(or using an avionics master switch). 

2.  Press the FUNC key to sequence through the configuration pages. Press the START/STOP 

key to sequence in reverse. Reverse sequence stops on the Display Mode page. 

3.  Use the CRSR key to highlight selectable fields on each page. 
4.  When a field is highlighted, use the 8 or 9 keys to select changeable fields or the 0 – 9 keys 

to enter numeric data. 

Summary of Contents for Columbia 400













































































































































































































































































































































































Reviews:

No comments

Related manuals for Columbia 400

Air Creation FUN 450 Instruction And Maintenance Handbook preview
FUN 450
Brand: Air Creation Pages: 16
Ocean Rodeo Go Joe Manual preview
Go Joe
Brand: Ocean Rodeo Pages: 8
ICP Savannah VG Maintenance Manual preview
Savannah VG
Brand: ICP Pages: 17
R2hobbies.com 2M Sloopy 2000 Instruction Manual preview
2M Sloopy 2000
Brand: R2hobbies.com Pages: 11
Zenair CH2000 Service Manual preview
CH2000
Brand: Zenair Pages: 78
Zenith ZODIAC 601 XL Assembly preview
ZODIAC 601 XL
Brand: Zenith Pages: 7
Rans S-7S COURIER Text Manual preview
S-7S COURIER
Brand: Rans Pages: 203
ICP VENTURA YY-MM-62 Series Pilot Operating Handbook preview
VENTURA YY-MM-62 Series
Brand: ICP Pages: 60
MHD MHDFLY TINY GLIDER Z5630 Manual And Using Instructions preview
MHDFLY TINY GLIDER Z5630
Brand: MHD Pages: 8
ELA Aviacion ELA 07 Pilot Operator'S Handbook preview
ELA 07
Brand: ELA Aviacion Pages: 54

Brands by name

Popular brands

Load more brands