PAGE 10
X FACTOR SERIES
GENERAL SPECIFICATIONS
1” Control Valve Size;
W” x L” x H”
9.3 x 10.5 x 7.0
Inlet/Outlet Fitting
Options; inches
3/4 to 1.25
Drain Pipe NPT (OD
Poly Tube) Size;
inches
3/4 (5/8)
Working Pressure;
Min to Max (PSI)
20 to 100
Water Operating Temp;
Min to Max (°F)
35 to 100
AC Adaptor Input;
Voltage - Hertz
120V AC - 60 Hz
AC Adaptor Output;
Voltage - Current
12V AC - 500 mA
3 Volt Lithium Coin Cell
Battery; type
2032
PC Board Relay Terminal
Block DC Output; Voltage
12V DC **
** Relay Specifications: 12V DC Relay with a coil resistance not less than 80 ohms. If mounting the relay under the control
valve cover, check for proper mounting location dimensions on the backplate.
Default
10.15 257.9
3.39 86.1
8.50 215.9
186.1
7.33
6.85 173.9
9.3
7.0
10.5
General Notes for estimating only.
