PAGE 9
STEP 5
STEP 5
– Next Regeneration Time (minutes): Set the minutes of day for regeneration using
or
buttons. Press
NEXT
to return to normal operation. Press
REGEN
to return to
previous step.
RETURN TO NORMAL MODE
CONTACT SCREEN PROGRAMMING
STEP 1 -
Press
NEXT
and
simultaneously for 3 seconds to access Installer Display
Settings.
STEP 2 -
Press
NEXT
to go to step 3.
STEP 3 -
Press
NEXT
to go to step 4.
From Step 4,
while hour is flashing, press and hold both the
CLOCK
and
button to
change phone number and banner text.
Phone Number -
Set phone number using the
or
arrow. Press
NEXT
to forward
to the next digit. Press
REGEN
to return to previous digit.
Banner Text -
Set the banner text up to a maximum of 44 characters. Use the
or
to select letters of the alphabet, numbers, ampersand (&), or a space in the banner text.
Press
NEXT
to forward to the next character or to exit the Installer Display Settings.
STEP 1
STEP 2
STEP 3
STEP 4
A non-rechargeable coin cell battery is located on the circuit board, used only to maintain the time of day during power
outages (all other information will be stored in memory no matter how long the power outage). The screen displays LOW
BATTERY when the battery needs to be replaced. The screen will remain illuminated solid blue when LOW BATTERY is
displayed. Initially LOW BATTERY display will alternate with the User display, finally displaying only LOW BATTERY. User
displays are still accessible by pressing
NEXT
.
LOW BATTERY
