9
Input 17
4-Wire PL Port 1 In
(Input side of 4W PL Interface. See above)
Input 18
4-Wire PL Port 2 In
Input 19
4-Wire PL Port 3 In
Input 20
4-Wire PL Port 4 In
Input 21
4-Wire PL Port 5 In
Input 22
4-Wire PL Port 6 In
Input 23
4-Wire PL Port 7 In
Input 24
4-Wire PL Port 8 In
Note that there are
routers
in the ADX2400 for the following:
Talkback
paths from the announce boxes to physical Talkback outputs.
Mixes may also be selected so that external talkback mixing is not required.
Physical
IFB inputs
at the truck to the various IFB outputs on the ADX-
120/140 units. One physical input may feed multiple IFB outputs.
Physical
PGM inputs
at the truck to the various PGM outputs on the ADX-
120/140 units. One physical input may feed multiple PGM outputs.
Four-wire
PL Ports
to the various PL channels on the ADX-120/140 units.
Any PL channel on the ADX-120/140s may be assigned to any four-wire port.
The appropriate mix-minus signals will automatically be generated, similar to
the 'party-line' function in the Adam intercom systesm.
This routing is controlled by the 'SOURCE' selections on the ADX-2400 for the
various outputs. See the configuration section for more information.
The AES and MADI versions of the ADX-2400 function in a very similar fashion.
Please see the manuals for those units for more detailed information.
Summary of Contents for ADX-140
Page 22: ...22 NOTES ...
