18
28-0752/02
STEP 5:
After beverage settles, press the Size button again to top off the drink. If the settle time is more than
fifteen seconds, the auto top-off times are cleared for all selected flavors.
STEP 6:
Repeat steps 2-5 for additional brands and cup sizes.
STEP 2
Press the brand button.
The selected brand’s LED will illuminate.
Multiple brands can be programmed at the
same time to pour the same amounts for
each size during this step. Do this by
selecting several brand buttons; however,
the first button selected will illuminate and
only its beverage will pour. The other
brands selected will flash slowly.
If multi-brand programming, do not set
carbonated drinks and non-carbonated
drinks at the same time because
carbonated drinks tend to pour faster.
STEP 3
Fill cup 1/2 full with ice.
STEP 4
Place cup under the nozzle, push and hold a
drink “size” button until the cup is full.
Once the pour is completed, the LED will
blink fast to indicate Settle Time program-
ming mode.
If the duration is more than 40 seconds, the
dispense function is stopped and the portion
STEP 7
Press Pour/Cancel button to save the por-
tions and exit programming mode.
If no button is pressed in 60 seconds, the
system will exit program mode and save the
current programming.
The Pour/Cancel will blink until the program
is saved.
Summary of Contents for 23308 SERIES
Page 36: ...36 28 0752 02 5 10 MVU...
