lancer 85-3151R-20-11111-22, Operation Manual

2

TABLE OF CONTENTS

ABOUT THIS MANUAL

This booklet is an integral and essential part of the product and 

should be handed over to the operator after the installation and 

preserved for any further consultation that may be necessary. 

Please read carefully the guidelines and warnings contained 

herein as they are intended to provide the user with essential 

information for the continued safe use and maintenance of the 

product. In addition, it provides 

GUIDANCE ONLY

 to the user 

on the correct services and site location of the unit.

BEFORE GETTING STARTED

Each unit is tested under operating conditions and is thoroughly 

inspected before shipment. At the time of shipment, the carrier 

accepts responsibility for the unit. Upon receiving the unit, 

carefully inspect the carton for visible damage. If damage exists, 

have the carrier note the damage on the freight bill and file a 

claim with carrier. Responsibility for damage to the dispenser 

lies with the carrier.

The installation and relocation, if necessary, of this product must be carried out by qualified personnel with 

up-to-date safety and hygiene knowledge and practical experience, in accordance with current regulations.

IMPORTANT SAFETY INSTRUCTIONS..........................3

Intended Use..............................................................3

Power Warning...........................................................3

 CO

2

 Warning...............................................................3

Water Notice...............................................................3

SPECIFICATIONS AND FEATURES............................4-6

Multi-brand Tower Specifications................................4

Single Brand Tower Specifications.............................5

General System Overview - Multibrand Tower...........6

General System Overview - Single Brand Tower........6

PRE-INSTALLATION CHECKLIST...................................7
INSTALLATION...........................................................8-11

Unpacking the Dispenser............................................8

Selecting/Preparing a Counter Location.....................8

Tower Installation........................................................9

Junction Box Installation........................................9-10

Adjust Water Flow Rate & Syrup/Water Ratio..........11

Volumetric Valve Adjustment.....................................11

PROGRAMMING AND CONFIGURATION...............12-13

Programming Overview............................................12

Valve Configuration...................................................12

Purge Mode..............................................................13

Timed Pour Mode.....................................................13

Portion Control Programming...................................13

CLEANING AND SANITIZING..................................14-15

General Information..................................................14

Cleaning and Sanitizing Solutions............................14

Daily Cleaning...........................................................14

Weekly Cleaning and Sanitizing...............................15

Cleaning and Sanitizing Syrup Lines - BIB...............15

TROUBLESHOOTING...............................................16-18
ILLUSTRATIONS AND PART LISTINGS..................20-29

Electronics Board - LFCV.........................................20

Electronics Board - VV.............................................21

Nozzle Assembly - LFCV..........................................22

Nozzle Assembly - VV..............................................23

LFCV Spare Parts.....................................................24

Water, Volumetric Valve Spare Parts........................25

Misc. Spare Parts.....................................................26

Wiring Diagram - LFCV............................................27

Wiring Diagram - VV.................................................28

Counter Cutout.........................................................29

SAFETY NOTICES

READ ALL SAFETY INSTRUCTIONS BEFORE USING THIS UNIT.

This manual contains important safety information and all applicable safety precautions must be observed. To reduce 

the risk of fire, electric shock, damage to the equipment or personal injury when using this unit all instuctions/warnings 

on the product being used must be followed:

Text following the Warning signal indicates a            

hazardous situation, which if not avoided, will result 

in death or serious injury. Be sure to read all Warning 

statements before proceeding with the installation. 

!

WARNING

Text following the Caution signal indicates a             

hazardous situation, which if not avoided, could result 

in death or serious injury. Be sure to read the Caution 

statements before proceeding with the installation

!

CAUTION

Text following the Attention signal addresses a 

situation that if not followed could potentially damage 

the equipment. Be sure to read the Attention 

statements before proceeding

!

ATTENTION

Text following the Note signal provides you with 

information that may help you more effectively perform 

the installation procedures within this manual. 

Disregarding information will not cause damage or 

injury, however it may limit the performance of the 

 dispenser. 

NOTE