19
Update Brands/Flavors
4. In the “Update from USB” section, press the
Brands
button.
There will be a check mark next to the Brands button if
the USB drive has the brand files in the correct place.
NOTE
To upload new flavors to the TwinPour, create the
flavor.brand
file and put into a folder named “flavors”,
then repeat steps 2-6.
NOTE
5. Once the Brands button turns green then the updated brands
will be available.
1. Create a USB drive with the updated
.brand
file in a folder
named “brands” as shown in the image below.
2. Plug the USB into the port on the side of the PCB controller
box, located in the upper left corner of the front of the unit.
A. USB Port
A
3. Access the Service menu on the left side screen and press
the
Data Management
button.
6. Repeat Steps 2 - 5 for the right side PCB and screen.
