Lancia Lybra Owner'S Handbook Manual Download

Page: 166 / 298

165

– Make sure the headlight beams are

properly positioned: if they are too
low, they reduce visibility and strain
your eyes. If they are too high they
can dazzle other drivers.

– Only use main beam headlights

when you are driving outside town
and when you are sure they do not
annoy other drivers.

– Dip your headlights as soon as you

see cars coming in the other direction
and pass them with the headlights
dipped.

– Keep all lights clean.

– Beware of animals crossing the

road when driving in the country.

– You should be physically fit and

mentally alert before setting out on
long journeys.

– Do not drive too many hours at a

time but stop at intervals to stretch
your legs and recoup your energy.

– Make sure the air in the car is be-

ing changed continuously.

– Never coast downhill (i.e. with the

engine off): if you do, you lose the aid
of engine braking and power brakes
so that braking requires greater effort.

– Never coast downhill (i.e. with the

engine off): if you do, you lose the aid
of engine braking.

DRIVING AT NIGHT

There are the main rules to follow

when you are driving at night.

– Drive especially carefully: it is

harder to drive at night.

– Slow down especially if the road is

not lit.

– At the first signs of sleepiness, stop:

continuing would be a risk for your-
self and everybody else. Only start
driving again when you have had
enough rest.

– Keep a greater safety distance

from the cars in front of you than
during daylight hours: it is hard to
judge how fast other cars are going
when all you can see are their lights.

Always fasten both front

and back seat belts, in-
cluding child restraint sys-

tems. Travelling with the seat belts
unfastened increases the risk of in-
jury or death if you are in a colli-
sion.

Driving while drunk or

under the influence of
drugs or certain medicines

is dangerous for both you and
other road users.

Summary of Contents for Lybra











































































































































































































































































































Search results

Summary of Contents for Lybra

Reviews:

Related manuals for Lybra

Brands by name

Popular brands

Lancia Lybra, Owner'S Handbook Manual

Search results

Summary of Contents for Lybra

Reviews:

Related manuals for Lybra

Brands by name

Popular brands