147
To activate/deactivate options, select
and confirm them with the right knob
21
(
fig. 1
).
The “Autoclose” option, only avail-
able on versions fitted with Keyless
System, makes it possible to acti-
vate/deactivate door and trunk auto-
matic lock when the owner leaves the
car (> 4 metres) with the CID device
(“Autoclose” function).
The option “Doors lock if speed ex-
ceeds 20 km/h” makes it possible to
set the automatic door, trunk and fuel
cap lock when the car speed exceeds
20 km/h.
The option “Lock/unlock trunk with
doors synchronous” makes it possible
to lock/unlock the trunk lock when
operating the central door lock.
When the “Opening driver door
only” option is off, pressing the re-
mote control button will open all the
doors; while with this option on, only
the driver door will open. When this
option is active, it is however possible
to open all the doors through the but-
ton set on the driver door panel, (af-
ter opening the driver door obvi-
ously).
The option “Lock glove box” makes
it possible to lock/unlock the glove
box when removing the key from the
ignition switch.
“HEATER” SETTINGS
Select and confirm this function on
the main SETUP screen (
fig. 98
), to
display the parked-car heater settings
screen (where provided).
The settings available are the fol-
lowing:
– Operate now
– Timer 1
– Timer 2.
To activate/deactivate the required
function, select and confirm it with
the right knob
21
(
fig. 1
).
The option “Operate now” enables
to warm the passenger compartment
with engine stopped and warm and
ignition key to
MAR
, using the engine
coolant.
The timer cannot be programmed
when this function is on.
132-151 connect thesis GB 22-10-2007 10:45 Pagina 147