151
“OTHER SETTING” FUNCTION
Select and confirm this function on
the main SETUP screen (
fig. 98
), to
display the screen to be used for ex-
cluding the automatic parking brake
engagement when turning the engine
off, in order to move the car manually
(e.g. in the garage).
Automatic parking brake shall be
deactivated before turning the igni-
tion key to
STOP
and only with the
car at a standstill. When turning
again the key to
STOP
the parking
brake will not be engaged. The auto-
matic parking brake will be restored
when turning the key to
MAR
.
The automatic parking brake can
also be deactivated by directly turn-
ing the ignition key as described in
the Owner Handbook.
To deactivate the automatic parking
brake, select and confirm “Automatic
parking brake” with the right knob
21
(
fig. 1
).
Press “Go back” to return to the
main SETUP screen.
IMPORTANT
If after deactivating
the parking brake, the car starts to
move at a speed higher than that of a
normal manual movement, this func-
tion will be automatically deactivated
and the parking brake will be imme-
diately engaged.
DISPLAYING ACTIVE
SETTINGS
Press “View” on the main SETUP
screen (
fig. 98
), to display in se-
quence the settings active for the se-
lected set (automatic door lock/un-
lock, automatic parking brake, etc.).
Press “Repeat” to display again the
active settings sequence.
Press “Go back” to return to the
main SETUP screen.
132-151 connect thesis GB 22-10-2007 10:45 Pagina 151
