35
RADIO FUNCTION MAIN
SCREEN (fig. 20)
Selecting the Radio source with the
SRC key
12
(
fig. 1
) or pressing the
corresponding multifunction key (on
screens with audio sources at the bot-
tom of the display), the following
functions are displayed:
– Audio Mute
– TP
– RDS-AF
– PTY
– Autostore
– Frequency
– Settings.
“AUDIO MUTE” FUNCTION
The “Audio Mute” function enables
to bring the volume to zero, keeping
the Radio module active.
To switch the function on/off, select
and confirm it with the right knob
21
(
fig. 1
).
The “Audio Mute” function can also
be turned on/off by pressing the
“ON/OFF” key on the remote control.
When the function is on (volume to
zero) symbol“
3
” appears near the
wording “Audio Mute”.
The “Audio Mute” function can be
enabled only if the TP function is on
(symbol “
3
” near TP).
“TP” FUNCTION
(traffic information)
Certain stations in the FM band are
also enabled to broadcast information
about the conditions of the traffic.
In this case the displays shows the
abbreviation “TP”.
To turn the “TP” function on, select
it with the right knob
21
(
fig. 1
), and
then press the knob to confirm it.
When the function is on, symbol “
3
”
appears in the small square near the
wording.
With the “TP” function on it is pos-
sible:
– to seek only RDS stations that
broadcast in the FM band, enabled to
broadcast traffic information;
– to receive traffic information also
if the cassette player or the CD player
are working;
– to receive traffic information at a
preset minimum level also with the
radio volume down completely or in
stand-by.
fig. 20
L0A5084g
028-061 connect thesis GB 22-10-2007 10:41 Pagina 35