background image

61

VOICE COMMANDS

Certain functions of the Audio sys-

tem can be activated or deactivated
through voice commands.

For further information about voice

commands and voice prompts see sec-
tion “Voice commands”.

Manual channel storage

The channel being watched can be

stored with the multifunction keys
(1), (2), (3), (4) and (5).

Keep one of these keys pressed until

the display shows the number of the
key with which the channel has been
stored.

Automatic channel storage

The CONNECT TV tuner is pro-

vided with the “Autostore” function.
When this function is on the 5 chan-
nels with the strongest signal are
stored automatically. To turn this
function on, see previous paragraph
“Autostore function”.

Watching stored channels

Proceed as follows:

– select the TV tuner mode with the

SRC key 

12

(

fig. 1

) or the multifunc-

tion keys; 

– briefly press one of the channel

storage keys(1), (2), (3), (4) or (5).

028-061 connect thesis GB  22-10-2007  10:41  Pagina 61

Summary of Contents for THESIS CONNECT






































































































































































Reviews: