Lancol
MICRO-768 Battery Tester User Manual
16
Normally, cranking voltage value lower than 9.6V is regarded as abnormal,
higher than 9.6V is OK.
Test result of the tester includes actual cranking voltage, actual cranking
amps, and actual cranking time.
When cranking test is abnormal, battery test result will also be displayed at the
same time.See below picture:
This is for the convenience of the maintenance personnel to quickly know the
whole state of the starting system according to the data.
After testing finished, do not shut down the engine, press OK key to enter
Charging Test.
3.5 Charging System and Rectifier Diode Test
When enter the charging test, tester will prompt "Charging Test?"
Press OK key again to start the charging test.
NOTE: Do not shut down the engine during the test.All electrical appliance
and device are in OFF state.Turn on/off any electrical appliance in
the vehicle during the test will affect the accuracy of the test result.
Tester will do the following tests in a sequence:
