LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721 VPN
Chapter 5: Linking two networks
48
EN
Select whether connection establishment is to take place via the name or
IP address of the central router, or via an ISDN connection. Enter the
address or name of the central router, or its ISDN number.
The final step is to define how the networks are to intercommunicate:
The INTRANET at headquarters only is to be provided to the branch
offices.
All private networks at the branch offices can also be connected to
one another via headquarters.
All entries for the central device are made just once and are then
stored to the device properties.
5.4
Instructions for WEBconfig
Under WEBconfig, the coupling of networks via VPN cannot be con-
figured using the wizard. It can only be set up in the expert configu-
ration. For details, please see the reference manual.
Perform the configuration on both routers, one at a time.
From the main menu, launch the 'Connect two local area networks' wiz-
ard. Follow the wizard's instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with
Terminate
.
After finishing the configuration of both routers, you can test the network
connection. Try to contact a computer in the remote LAN (e.g. with a
ping
). The LANCOM Router should automatically set up a connection to
the remote station and contact the required computer.
