LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 3: Basic configuration
38
EN
vider. They are normally entered without an area code. These numbers are
only relevant for the router functions (LAN to LAN coupling, RAS), not for
remote configuration and LANCOM VPN Option.
A dialing prefix for access to the public telephone network. This is nor-
mally required only when using an ISDN PBX. '0' is the usual prefix. It is
used for all outgoing calls.
Finally, you should know whether your telephone provider transmits an
ISDN connect-charge pulse. This signal can be used LANCOM Wireless
DSL for connect-charge budgets and the accounting function.
3.1.6
Connect charge protection
Connect charge protection blocks connections that go beyond a previously set
amount, protecting you from unexpectedly high connection costs.
In LANCOM Wireless DSL, there are three independent budgets: For DSL
access, you can set a maximum connection time in minutes. In addition to this
time budget, there is also a budget for limiting ISDN connection charges.
In order for the limitations according to connect charge rates to func-
tion properly, it is necessary to enter the information for connect
charge rates through ISDN.
Any budget can be deactivated by entering the value '0'.
It is possible to completely turn off connect charge protection
In basic settings the charge protection is defined to maximum 600
minutes within seven days. Adapt this setting to your personal needs
or deactivate the charge protection if you have arranged a flatrate
with your provider.
3.2
Instructions for LANconfig
햲
Start up LANconfig by clicking
Start
Programs
LANCOM
LANconfig
LANconfig automatically detects the new LANCOM Wireless DSL in the
TCP/IP network. Then the setup wizard starts that will help you make the
basic settings of the device or will even do all the work for you (provided
a suitable network environment exists).
