LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 8: Security settings
74
EN
Your LANCOM Wireless DSL has a password protection for the configuration
access. This protection is already activated during the basic configuration by
entering a password.
The device locks access to its configuration for a specified period of time after
a certain number of failed log-in attempts. Both the number of failed attempts
and the duration of the lock can be set as needed. By default, access is locked
for a period of five minutes after the fifth failed log-in attempt.
Besides these general settings you can also check the security settings of the
wireless network with the security wizard as far as your device has a WLAN
interface.
8.2.1
Wizard for LANconfig
햲
Mark your LANCOM Wireless DSL in the selection window. Select from the
command bar
Extras
Setup Wizard
.
햳
Select in the selection menu the setup wizard
Control Security Settings
and confirm your choice with
Next
.
햴
Enter your password in the following windows and select the allowed pro-
tocols for the configuration access from local and remote networks. Addi-
tionally, enter the MSN for remote configuration via ISDN.
햵
In a next step parameters of the configuration lock like number of failed
log-in attempts and the duration of the lock can be adjusted.
햶
Now you can set the security settings for the WLAN. These include the
name of the wireless network, the closed network function and the WEP
encryption. You can type in the parameters for both wireless networks
separately on devices with the option of a second WLAN interface.
햷
Now you specify filter lists for stations (ACL) accessing the WLAN and pro-
tocols. Thereby, you restrict data exchange between the wireless network
and the local network.
