LANCOM ES
-
2126+ und LANCOM ES
-
2126P
쮿
Chapter 4: Operation of Web- based Management
71
EN
쮿
Parameter Description
:
왏
MAC: It is a six-byte long Ethernet hardware address and usually
expressed by hex and separated by hyphens. For example,
왏
00 – 40 - C7 - D6 – 00 - 01
왏
VID: VLAN identifier. This will be filled only when tagged VLAN is
applied. Valid range is 1 ~ 4094.
왏
Queue (Priority): Set up the priority( 0~3) for the MAC.
왏
Forwarding Rule(Drop Policy):
Static: A MAC address is assigned to a specific port, all of the
switch’s traffics sent to this MAC address will be forwarded to this
port.
Static with Destination Drop: While the DA of the incoming
packets meets the value you set up, these packets will be drop-
ped.
Static with Source Drop: While the SA of the incoming packets
meets the value you set up, these packets will be dropped.
왏
Port : Select the port No. you would like to do setup in the switch. It
is 1 ~26.
쮿
Function name: MAC Alias
쮿
Function Description: MAC Alias function is used to let you assign MAC
address a plain English name. This will help you tell which MAC address
belongs to which user in the illegal access report. At the initial time, it
shows all pairs of the existed alias name and MAC address.
There are three MAC alias functions in this function folder, including MAC
Alias Add, MAC Alias Edit and MAC Alias Delete. You can click <Create/
Edit> button to add/modify a new or an existed alias name for a specified
MAC address, or mark an existed entry to delete it. Alias name must be
composed of A-Z, a-z and 0-9 only and has a maximal length of 15 cha-
racters.
