LANCOM GS
-
1224 and LANCOM GS
-
1224P
쮿
Chapter 4: Operation of Web- based Management
53
EN
Default: No Limit
4.2.15
Storm Control
Storm Control is used to block unnecessary multicast and broadcast frames
that reduce the switch's performance. When the function is enabled and
values of storm control are exceeded, multicast and broadcast frames will be
dropped.
Parameter:
쮿
ICMP Rate:
Enables the ICMP Storm capability. The setting range is 1k-1024k per
second. If the amount of ICMP packets reachs this value, ICMP packets
will be dropped.
Default: No Limit
쮿
Learn Frames Rate:
To enable the Learn Frames Storm capability. User can use the drop-down
menu to select the number of frames. The setting range is 1k~1024k per
second.
Default: No Limit