LANCOM GS
-
1224 and LANCOM GS
-
1224P
쮿
Chapter 4: Operation of Web- based Management
63
EN
host then sets a timer, with a value less than the Max Response Time field
in the query, for each group to which it belongs. It calculates the number
of times of IGMPV1 report.
쮿
V2 Reports: See V1.
쮿
V3 Reports: See V1.
쮿
V2 Leaves:
When a host leaves a group, it sends a leave group membership message
to multicast routers on the network. It shows the leaves number.
4.3.5
Ping Status
Sets up target IP address for ping function and display ping status.
Ping test function is a tool for detecting if the target device is alive or not
through the ICMP protocol which abounds with report messages. The switch
provides the ping test function to let you know if the target device is available
or not. Fill in an IP address and click
Apply
. The result will show if the target
device is available. You can update the table with a click on
Refresh
.
Parameter:
쮿
Ping Parameter:
왏
Target IP address:
Target IP address to ping.
