11
LANCOM Installation Guide – Configuration
EN
Configuration
Configuration options for websmart and managed
switches
There are three different options to configure the device:
A
Via a graphical user interface in a browser (WEBconfig):
This configuraton option (for websmart- and managed switches) is only
available if you have network access to the device’s IP address from
your computer.
A
Via a graphical user interface in a browser (LANCOM Management
Cloud – LMC):
This configuration option (only for managed switches) is only available
if you have network access and both your device for configuration and
the switch have a connection to the LANCOM Management Cloud.
A
Configuration via console (Command Line Interface – CLI):
This method of configuration (only for managed switches), which
requires a program such as SSH, Telnet, Hyperterminal, or similar, can
be conducted over a network connection or with a direct connection
via serial interface (RS-232 / RJ45).
