LANCOM L
-
300 Access Point series
Chapter 4: Security settings
48
EN
4.3.1
LANconfig Wizard
Mark your LANCOM in the selection window. From the command line,
select
Extras
Setup Wizard
.
In the selection menu, select the Setup Wizard,
Check security settings
and confirm the selection with
Next
.
In the dialogs that follow you can set the password and select the proto-
cols to be available for accessing the configuration from local and remote
networks.
In a subsequent step, you can set parameters for locking the configuration
such as the number of incorrect password entries and the duration of the
lock.
For devices with a WLAN interface, you have the option of specifying the
security parameters of the wireless network. This includes the name of the
wireless network, the closed-network function, and encryption by
802.11i/WPA or WEP. For devices with an optional second WLAN inter-
face, you can set the parameters for both wireless networks separately.
For the WLAN interface, you can subsequently define the access control
lists (ACL) and the protocols. This allows you to place limitations on the
data exchange between the wireless network and the LAN.
For the firewall, you can activate stateful inspection, ping blocking, and
the stealth mode.
The Wizard will inform you as soon as the entries are complete. Close the
configuration with
Finish
.
