LANCOM OAP
-
54
-
1 Wireless – LANCOM OAC
-
54
-
1 Wireless
Chapter 5: Advanced wireless LAN configuration
61
EN
Under WEBconfig or Telnet the network settings for the logical WLAN
interfaces can be found under the following paths:
5.4.3
Encryption settings
For access to a WLAN, the appropriate encryption methods and key must be
set in the client station.
햲
To enter the key, change to the '802.11i/WEP' tab under LANconfig in the
'Wireless LAN' configuration area. From 'WPA / private WEP settings',
select the
first
WLAN interface from the list of logical WLAN settings.
햳
Enable encryption and match the encryption method to the settings for
the access point.
햴
In WLAN client operating mode, the LANCOM Access Points and LANCOM
Wireless Routers can authenticate themselves to another access point
using EAP/802.1X. For this, select the desired client EAP method here.
Note that the selected client EAP method must match the settings of the
access point that the device is attempting to log onto.
Depending on the EAP method, the appropriate certificates must be
stored in the device.
Configuration tool
Menu/Table
WEBconfig
Expert configuration
Setup
Interfaces
WLAN
Net-
work
Terminal/Telnet
Setup/Interfaces/WLAN/
Network settings
