Section 7: Features & Benefits
RCB6610 & RCBM6610 Series 2 S/N Rotary Cutters 330-584M
12/12/18
61
RCB6615 & RCBM6615 Series 2
Features
Benefits
Surpassed rugged industry
standards
All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing
procedures according to ISO 4254-13.
Factory assembled
Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty
Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes
Gearboxes are capable of handling heavy cutting applications.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft
Large output shaft handles shock loads better.
2 Piece shield on wing gearboxes
Driveline grease zerks are easier to access.
Self-leveling hitches
Reduces drawbar wear by keeping hitch level while going through ditches.
Narrow A-frame hitch
Allows for a tighter turning radius.
Adjustable park jack angle
Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger
Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline:
Cat. 6 CV or Cat. 5 conventional
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Grease zerks on end caps of
driveline cross journals
Intermediate and wing driveline cross journals are easier to grease.
All drivelines have access holes for greasing the U-joints and inner profiles.
4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
High blade tip speed
Allows clean cutting of material and even distribution. See Specifications for actual FPM.
6" Blade overlap
Eliminates skipping during turns.
High cutting capacity
Can cut brushy areas with saplings up to 4 1/2".
Pre-cut chamber
Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Reinforced leading edge
Front of deck can withstand heavy brush and saplings.
12" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
10 Gauge smooth deck top
Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom
Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt
Reduces debris piercing possibilities. Can be replaced if damaged.
3/16" Round stump jumper backed
with a 1" thick mounting plate
Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft.
Can hold up to tough conditions.
Spindle nut protected
Spindle nut and threads extending beyond the nut are guarded to protect against
damage from hitting solid objects.
Beveled skid shoes on wings
Reduces gouging the ground when turning.
LED signal lights
LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Hinged wing sections
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
Greasable wing folding hinge
Provides for a long hinge life and allows the wing to fold up and down with less stress.
1" Solid hinge rods
Gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport lock
Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Collapsible 1" Leveling rods
Prevents damage and failure to leveling rods. Large diameter leveling rods provide
superior supporting strength over rough terrain.
Enclosed dual leveling rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms
Provides independent suspension, cushions loads on drawbar.
Section 7: Features & Benefits
